Windows Vista, 7

Windows Vista and Windows 7 should be able to Connect to the OSU_Secure network with the automatic instructions below. If these instructions fail, you can try connecting to OSU_Secure manually


 

Connect Automatically

To connect to the OSU_Secure network:

  1. Click on your wireless network icon in your taskbar.
  2. Click on the OSU_Secure network in the list, and click the Connect button.
  3. A window should pop up asking for a username and password. Enter your ONID Username and ONID Password, and hit enter. Your computer should then connect to OSU_Secure.

Note: If you are unable to connect automatically, try the manual steps below:


 

Connect Manually

Below are the manual steps to connect to OSU_Secure with Windows Vista/7. Please follow all directions closely for proper setup.

All of the images below can be clicked on if you need a larger view.

Step 1

Click Start, then click Control Panel. Once the Control Panel opens, click Network and Internet, then Network and Sharing Center, then on the left-hand side, click Manage Wireless Networks.

A list of your saved wireless networks (if any) should open up.

Step 2Wireless Connection Properties Menu

Click the Add button on this page.

Note: If OSU_Secure is already listed here (if you tried to add it already), delete it from the list before continuing to clear out any old settings.

Step 3Wireless Networks List

A separate window should open. When it does, select Manually Create a Network Profile.

Step 4Association Screen

This will open a new connection box. Type in the following information:

  • Network Name: OSU_Secure
  • Security Type: WPA2_Enterprise
  • Encryption Type: AES

Leave everything else the way it is. Once finished, it should look like the screenshot to the left (click on it for a larger view). Click the Next button when you are done.

Step 5Success Added

A window should appear saying that you Successfully added OSU_Secure. Click the Change Connection Settings option, and a new settings window should open.

Step 6PEAP Properties

Click on the Security tab at the top, and verify that Security type is still WPA2-Enterprise, Encryption Type is still AES, and the Network Authentication Method is set to Microsoft: Protected EAP (PEAP).

Click on the Settings button next to the drop-down menu.

Step 7PEAP Settings

Un-check the box next to Validate Server Certificate.

Make sure that the Secure Authentication Method is set to Secure Password (EAP-MSCHAP v2), and then click the Configure button next to it.

Step 8Auto Login Settings

Un-check the box next to Automatically use my Windows logon name and password.

Click OK three times to close the open settings windows.

Step 9Connect to Secure Network

You should be looking at the Successfully added OSU_Secure window again. Click Close to close this window.

Click on the wireless icon in the lower left-hand corner of your dock, select the OSU_Secure network from the list, and click Connect.

Step 10ONID Login

A box should pop up asking for network authentication credentials. Enter your ONID username in the top box, then your ONID password in the bottom box and click OK.

Step 11

If it asks you to set a location for Secure, choose Public Network.

You should now be connected to the OSU_Secure network!